18650 리튬 배터리가 손상되었는지 판단하는 방법
18650 배터리가 손상되었는지 여부를 확인하는 방법은 다음과 같습니다:
체크된 18650 리튬이온 배터리의 라벨은 출력 전압이 3.7V임을 확인하지만 용량은 2000mAh보다 크거나 작을 수 있습니다(일부는 3000mAh).
18650 리튬 이온 배터리의 양극과 음극을 찾으십시오. 배터리의 둥근 돌출부가 양극이고, 평평한 바닥이 음극입니다.
3. Use a multimeter to check the output voltage. Make sure it’s set to measure voltage. Place the small metal rod at the end of the red cable onto the positive terminal of the 18650 Li-Ion battery. Place the metal rod at the black end of the multimeter on the negative end of the battery.
4. Check the multimeter display panel. If the battery is in normal condition, it should show between 3.6 and 3.7V. If the reading is below 3.5V, fully charge the battery. If it’s still below 3.5V after charging, it means you need to replace it, as these are all signs that the battery charge is slowly depleting.
5. 배터리 용량을 확인하고, 멀티미터를 시간당 흐르는 전류를 측정하도록 설정한 뒤, 배터리의 양극과 음극 금속 끝에 두 개의 금속 막대를 놓는다.
6. 멀티미터 디스플레이를 확인합니다. 라벨의 mAh와 일치하는 완전 충전된 리튬 이온 18650 배터리는 배터리가 양호하게 사용 중임을 나타냅니다.






